EURUSD Bid: --
USDJPY Bid: --
GBPUSD Bid: --
USDCHF Bid: --
AUDUSD Bid: --
USDCAD Bid: --
NZDUSD Bid: --
EURGBP Bid: --
GBPJPY Bid: --
WTI Bid: --
BRENT Bid: --
XAUUSD Bid: --
XAGUSD Bid: --
SPX500 Bid: --
DAX40 Bid: --
US30 Bid: --
JPN225 Bid: --
NAS100 Bid: --
UK100 Bid: --
BTCUSD Bid: --
ETHUSD Bid: --
LTCUSD Bid: --
XRPUSD Bid: --
EURUSD Bid: --
USDJPY Bid: --
GBPUSD Bid: --
USDCHF Bid: --
AUDUSD Bid: --
USDCAD Bid: --
NZDUSD Bid: --
EURGBP Bid: --
GBPJPY Bid: --
WTI Bid: --
BRENT Bid: --
XAUUSD Bid: --
XAGUSD Bid: --
SPX500 Bid: --
DAX40 Bid: --
US30 Bid: --
JPN225 Bid: --
NAS100 Bid: --
UK100 Bid: --
BTCUSD Bid: --
ETHUSD Bid: --
LTCUSD Bid: --
XRPUSD Bid: --

US January industrial production +0.7 vs +0.4% expected

Posted: 18th Feb 2026

  • Prior was +0.4%
  • Capacity utilization 76.2% vs 76.5% expected
  • Manufacturing output +0.6% vs +0.4% expected

The Federal Reserve's industrial production data for the fall was complicated by delayed releases stemming from the government shutdown, with October and November figures published jointly on December 23 and December data following on January 16. Despite the reporting disruptions, the data painted a picture of a sluggish manufacturing sector offset by volatile swings in utilities and mining, with a notably stronger finish to the year.

In September, industrial production edged up 0.1% after a revised 0.3% decline in August, with total IP growing at a 1.1% annual rate in Q3. Manufacturing output was flat on the month, as gains in aerospace, fabricated metals, and computer and electronic products were offset by a 2.2% drop in motor vehicles and parts. Utilities output rebounded 1.1% after a 3.0% plunge the prior month, while mining was unchanged. Capacity utilization held steady at 75.9%, sitting 3.6 percentage points below its long-run average. Total IP stood 1.6% above its year-earlier level.

The combined October-November release showed IP averaging 0.1% monthly growth over the two months. October saw a 0.1% decline, dragged down by a 0.4% drop in manufacturing output. November brought a partial recovery with IP rising 0.2% (later revised up to 0.4%), though manufacturing output was initially reported flat (subsequently revised to +0.3%). There were meaningful swings in both mining and utilities across the two months, though both sectors posted net gains. Capacity utilization stood at 76.0% in November, 3.5 percentage points below its long-run average. Total IP was 2.5% above its year-ago level.

December capped off the year with a solid 0.4% increase in IP, beating market expectations for a 0.1% gain. Manufacturing output rose 0.2%, with durable goods up 0.1% and nondurables up 0.3%. Within durables, primary metals led with a 2.4% gain — the largest in six months — while electrical equipment rose 1.7%, boosted by data center construction. However, motor vehicles and parts remained weak, and wood products fell 2.3% for the fourth consecutive month amid tariff pressures and housing affordability challenges. Utilities output surged 2.6% on cold weather-driven heating demand, while mining fell 0.7% as low oil prices discouraged drilling and coal output dropped 4.3%.

For Q4 as a whole, total IP grew at a 0.7% annual rate, while manufacturing output actually declined at a 0.7% annual rate — underscoring the sector's continued struggles. On a brighter note, IP grew 2.2% year-over-year in Q4, the best annual reading since 2022 following full-year contractions in 2023 and 2024. The total IP index stood at 102.3% of its 2017 average in December, 2.0% above year-earlier levels. Capacity utilization ticked up to 76.3%, still 3.2 percentage points below its long-run average, suggesting ample slack in the industrial sector. As Capital Economics noted, despite tariffs intended to boost domestic manufacturing, no meaningful renaissance has materialized.

This article was written by Adam Button at investinglive.com.

Source: Investing Live - News

Follow us on
Website Managed by BuiltByGo
Disclaimer: The information provided on FX Axe is for educational and informational purposes only and should not be construed as financial advice. Trading Foreign Exchange (FX), Contracts for Difference (CFDs), and other leveraged financial products involves a high level of risk and may not be suitable for all investors. Leverage can work both to your advantage and disadvantage, and as a result, you may lose more than your initial investment. Before deciding to trade FX, CFDs, or any other financial instrument, you should carefully consider your investment objectives, level of experience, and risk tolerance. You should not invest money that you cannot afford to lose. It is strongly advised that you seek independent financial advice if you have any doubts. FX Axe does not provide investment, tax, legal, or financial advice of any kind. We may receive compensation from brokers and partners featured on this website, but such relationships do not influence our reviews or recommendations. All reviews are based on our own opinions and research and should not be interpreted as endorsements or guarantees of any service. Past performance is not indicative of future results. The trading of FX and CFDs carries a significant risk of loss. By using this website, you acknowledge that FX Axe bears no responsibility for any losses you may incur from your trading activities or reliance on information provided here.

Affiliate Disclosure: Some of the links and references on FX Axe may relate to third-party brokers or service providers. In certain cases, we may receive compensation if you choose to engage with these providers through our website. This helps support the ongoing operation of the site and allows us to continue publishing content at no direct cost to our readers. Our content is created with the aim of being informative and useful. While commercial relationships may exist, we strive to ensure that the information presented remains objective and based on our own research and perspective.
cross